ASCO电磁阀，以它独有的特点迅速占领市场，质量可靠，价格底，货期准时，提高了效率节约了成本，受到广大客户的极大欢迎。
美国ASCO阿斯卡防爆电磁阀
ASCO电磁阀的选型
ASCO电磁阀选型首先应该依次遵循安全性，可靠性，适用性，经济性四大原则，其次是根据六个方面的现场工况(即管道参数、流体参数、压力参数、电气参数、动作方式、特殊要求进行选择)。
选型依据：
一、根据管道参数选择ASCO电磁阀的：通径规格(即DN)、接口方式
1、按照现场管道内径尺寸或流量要求来确定通径(DN)尺寸。
2、接口方式，一般>DN50要选择法兰接口，≤DN50则可根据用户需要自由选择。
二、根据流体参数选择ASCO电磁阀的：材质、温度组
安装管路：兼具手动功能，省去三只手动阀，可以在线维修，大大降低成本。
1、介质粘度适用范围可调：调节可实现气、水、油通用，方便采购、贮存、安装和维护。
2、阀门开启关闭时间可调：满足各种不同要求，有效防止水锤破坏。
3、 阀门开度可以调节：最大和最小开度可预置，提高自动控制精度。
4、 主阀磨损可以补偿：:延长阀门使用寿命，经受长期考验。
HB8320G200，HBXB320A200，HT8316G66，EFB210D089V，EFG551417MO， 8316G24MO，
EFHC801bG1，EFHC8321G2，HB8320G200，HBXB320A200，HT8316G66，NF8320A200，EFHC8016G1，
8344B60M0，EFL8344G70， JE2-8320G13，JE4-8025D224，JEP3X8320G174MBMO，SCG353A044，
G551A002MS，EF8342G003PMS，272614-155B，JKB8342G1M8， 35500343，35500344，SCG238C017，
JKB8342G1M8，8210G95HW，SCG353A043，U8325B39V，USF8210C93N，JKB8342G1MB，833-354-223006，
JKP8342G001MS，WPTISB307A406，8316G24MO，NF-G551A401-MS-M，WBIS8223A310，WBIS8262A386，
WBIS8316A381V，WBIS8316A384V， 8290AD34，8262G13，8263G206V，2636044，EF8308741F，EF8308B40，
EV8327G52，NFM1211，EV8551G455，EF8344G70，JBEFX8344G72MF， NFG-551B401-MS-M，
NFG-551B402-MS-M，8210G2，DM12-2FXF，5002253，E2318CBCOT，E2518CBCOT，EFHC8210G11，EFHC8210G13，
EFHC8210G3，8290AO34，WBIS8314A300MO，SCG31B-001MS，272614-155D，8290AO34，SCG531B-001MS，
EV8316G384V，JKF8210G95MO，JKH832G1MS，PSF8262C2，WPTISB307A406，JKF8210G95M0，JKH832G1MS，
WPTISB307A406，EFG551G417MO，NFB551B401，EF8320G18，HCG551A001MA4，K226061-1，SCG551B401MO，
SCG551A065，SCG551A066，SCG552A001，SCG551A017MS，SCG552A017MS，EF8551A001MS，EFG551H466，
EFG552G401MO，SCG551A001MS，SCG551A001MS，EFSCG551A002MS，SCG551A002MS，SCG353A047，EF8316G301，
SCG531B001MS，SCG551A005MS，SCG551A017MS，SCG551A018MS，SCG551A001MS，SCG551A002MS，EFG551H401MO，
EFG551A001MS，8210G009，EF8210G201，EF8262G212， EF8320G186，WT8551A001MS，VR7B2YAA2NGA，
EFHT8316G54，EFG353A043，8320G184MS，SCE370A027V，K302-116，SCG551A001MS，8360G74，NFB316D014，
E290A040，8300A82U，EF8320G174，NBETB307C039U，NAETB307C039，JE3-8344G72，JE32-8344G72，
JE32-8344G27MO，EF8210G089，EF8320G041，8342G1，EFHT8320G174，306191-MS，EF8344G70，
NKS374A090MS，NF-XB307B075F，EF8017G2，EF8003G1，HEHTX8210B3809724，HE8025B225，G55B401MO，
G551B417SCY2，7ATSC32000H5，8320G176，8262G232Q，8210G2Q，8262G007V，EF8320G184MS，EF8320G184，
PC11B/KL11AID/QP01，314PEY6，HB8320G174，EFL8316G304，SCG353A051，19200009，19290014EV，SCG353A065
General Information
Operator Type Solenoid
Product Weight 0.46 kg / 1.01 lb
Operating Pressure Ratings
Media Type Air/Water
Min Operating Pressure 0.3/0.3 Bar - 4/4 PSI
Max Operating Pressure 10/10 Bar - 145/145 PSI
Technical Information
Body Material Brass
Coil Class F
Flow Factor 2.4 Kv (m3/h) / 2.08 Cv
Max Ambient Temperature 60 C / 140 F
Max Fluid Temperature 85 C / 185 F
Min Ambient Temperature -10 C / 14 F
Min Fluid Temperature -10 C / 14 F
Orifice Size / DN 12 mm / 0.47 in
Pipe Size G 3/8 (ISO 228/1) & Rp 3/8 (ISO7/1)
Sealing Material NBR
Voltage Type AC
Voltage Value 48/50-60
Watt Rating 4 W
—SERVICE NOTICE—
ASCOr solenoid valves with design change letter “G” or
“H” in the catalog number (example: 8210G1) have an
epoxy encapsulated ASCOr Red Hat IIT solenoid. This
solenoid replaces some of the solenoids with metal
enclosures and open--- frame constructions. Follow these
installation and maintenance instructions if your valve or
operator uses this solenoid.
DEscriptION
Catalog numbers 8016G/H1 and 8016G/H2 are epoxy
encapsulated pull--- type solenoids. The green solenoid with
lead wires and 1/2I conduit connection is designed to meet
Enclosure Type 1---General Purpose, Type 2---Dripproof,
Types 3 and 3S---Raintight, and Types 4 and
4X---Watertight. The black solenoid on catalog numbers
prefixed “EF” is designed to meet Enclosure Types 3 and
3S---Raintight, Types 4 and 4X---Watertight, Types 6 and
6P---Submersible, Type 7, Explosionproof Class I, Division
1, Groups A, B, C, & D and Type 9, ---Dust--- Ignitionproof
Class II, Division 1, Groups E, F, & G. The Class II, Groups
F & G Dust Locations designation is not applicable for
solenoids or solenoid valves used for steam service or when
a class “H” solenoid is used. See Temperature Limitations
section for solenoid identification and nameplate/retainer
for service. When installed just as a solenoid and not
attached to an ASCO valve, the core has a 0.250---28
UNF---2B tapped hole, 0.38 minimum full thread.
Series 8016G/H solenoids are available in:
S Open ---frame Construction
The green solenoid may be supplied with 1/4I spade,
screw, or DIN terminals (Refer to Figure 4).
S Panel Mounted Construction
These solenoids are specifically designed to be panel
mounted by the customer through a panel having a .062
to .093 maximum wall thickness. (Refer to Figure 3 and
section on Installation of Panel Mounted Solenoid).
Optional Features For Type 1 --- General Purpose
Construction Only
S Junction Box
This junction box construction meets Enclosure Types
2,3,3S,4, and 4X. only solenoids with 1/4Ispade or screw
terminals may have a junction box. The junction box
provides a 1/2Iconduit connection, grounding and spade
or screw terminal connections within the junction box
(See Figure 5).
S DIN Plug Connector Kit No. K236034
Use this kit only for solenoids with DIN terminals. The
DIN plug connector kit provides a two pole with
grounding contact DIN Type 43650 construction (See
Figure 6).
